Burglar Alarms and Home Security

The importance of knowing the burglar alarm design is absolutely vital. If you are a beginner, knowing the components that make up the system you are installing to protect your house is necessary.

One of the most basic elements of a burglar alarm design is the control panel. Different manufacturers have different setups but their main function is the same; it is the nerve center of the entire system, and it is where, using the keypad, you can program and manage the devices installed in various parts of your home.

Another component is the back up battery and depending on the burglar alarm design can be either 2.1 Ah, or 7.0 Ah (for the larger panels). Two other elements present are the external sounder and 2 x magnetic contacts which are either surface or flush.

The PIR (Passive infra red detector) is a common trait of most burglar alarm designs. Most now consist of dual technology; there is also the 1 z 6 core alarm cable. This is needed by the external sounder and the magnetic contact.

The complexity of the burglar alarm design will depend on the number of detectors that come with the product. Although the PIR is standard, most now include glass break detectors, smoke detectors and plenty of others. All of these can add to the intricacy of the layout, but also give you more protection.

Once you have a thorough knowledge of the components that make up the security system in your house, you can now set it up properly. For example, a typical burglar alarm design can protect only certain areas (the spots where the devices are stored are called the zones). With your knowledge of the system, you may install protection in the children’s bedroom, the kitchen and exclude the dining room.

With the right devices and sensors, you can also change the burglar alarm design so that the PIR works in the dining room, the living room, and the garage, while the smoke detectors work in the shed or in the kitchen. You can also use the magnetic contact or external sounder at the vital entry and exit points. You can also set it up so that at certain times (i.e., during the day), some devices are turned off, and will be turned on at other time periods.

Understanding the basics of burglar alarm design is not really that hard. The instructional manuals are clear and concise and the time you invest in learning them will help you get the most out of the security system you have.

Tags: Wholesale, Alarm, Burglar Alarms, Crime Prevention, Burglaries, Home Protection