Burglar Alarms and Home Security

When installing your Wireless Burglar Alarm DIY Kit, first and foremost, it is important to read carefully the instructions that come with the product. These specific instructions are based on manufacturer’s specifications and are based on studies and tests conducted on the product.

In addition, here are some standard tips that can be used when you get your Wireless Burglar Alarm DIY kit. Before mounting your device, it would save you a lot of time if you check first the signal strength and amount of noise in the proposed location for your Burglar Alarm. Some DIY kits come with a signal strength indicator, but in the absence of such, you can try how the burglar alarm will work in that location, that is if signals are appropriately sent to the control panel, before you do the actual installation.

Do not install your Wireless Burglar Alarm directly under metal beams on top of windows or doors. This could interfere with the transmission of signal to the control panel. Also, do not install these burglar alarms directly onto metal or upvc coated metal door or window frames. If you have a hand-held metal detector, you can use this to detect the presence of metals.

Related to the previous tip, if wiring has to be installed on transmitters or receivers, keep this away from the aerial as this will interfere with the transmission of signals.

To achieve the greatest radio range or distance, mount all transmitters with aerials in vertical orientation. Most DIY kits require receiver aerials to be mounted vertically also. However, in cases when receiver aerials can be mounted both ways, this tip will not apply.

Do not alter the length of the aerials as these have been tested by the manufacturers to conform to the frequency of the Burglar Alarm DIY Kit. In the same way, do not replace the aerials with alternative products not approved by the manufacturer. In case of damage, it would be best to contact the manufacturer.

Do not install the receiver or receiver aerial near televisions, radio or computers as these can produce background noise. This also goes the same for large metal objects such as water tanks and radiators. As previously stated, the presence of metals can deter with the signal transmission.

In properties with very thick walls, it is probable that not enough signal strength can pass through to the receiver. Should this be the case, install the receiver aerial high up in a loft space so that signal can pass through the floor panels. This is particularly useful when the Wireless Burglar Alarm is installed on outside walls.

After installation of the Wireless Burglar Alarm DIY Kit, test and retest the product to ensure that you have properly installed it. This will give you the assurance that you have utmost protection and security.

Tags: Home Security, Alarm Systems, Home Protection, Burglar Alarms, Burglaries, House Alarm