Motion Detector Alarm

A motion detector alarm can determine if there is movement in a room. Upon detection, the device will trigger an alarm and notify the authorities. Many of these devices are also capable of sensing fire. There are also detectors that are immune to pets, so no false alarms are triggered.

Guidelines for Buyers

Calculate the space the system must cover. These security systems come in various sizes. You need to buy a device with a range that can fit your needs. There are also outdoor sensors if you want to install one.

These have a wider area coverage. These security systems have different activation functions. Some use ringing sounds, while others turn on the light.

Compare the Prices

Go to the nearest home improvement store and examine the available products. Check the warranty and the store’s return policy so you can get a refund or replacement in case of a problem. You can also shop online if you like.

You should only buy the alarm that has the features you need. If you are going to use a monitoring service, investigate the background of the company. You will be signing a contract, so you must make sure you get your money’s worth.

How to Install the Alarm

This is a general guide only. Refer to the user manual for more specific instructions.

Step 1

Turn off the fuse box power. Do not allow anyone to turn it back on until you are finished.

Step 2

Mark the area where you want to install the motion detector alarm. Position the sensors on the unit so it will be able to sense any movement. Hook up the sensors as indicated in the user manual.

Step 3

Hook up the motion sensor and fixture. If the unit must be plugged in, be certain the wires are set in the wire nuts.

Step 4

Turn on the power. Hook up the sensors to its base unit as indicated on the user manual. Typically, you must press two buttons simultaneously, one at the base and the other at sensor. Check the manual for the sensor distance, duration and other configurations you may have to set up.

Tips and Warnings

Read the user manual thoroughly so you can use the device correctly. Get the services of an electrician if you are not comfortable about handling wires.

Parts of the Alarm System

The detector is made up of a base unit and at least one detector. The detector utilizes a PIR (Passive Infrared) detector to watch the area it is installed in. When motion is detected, a signal is relayed to the base unit.

The base unit will get the signal sent by the detector and set off the alarm. If the unit is monitored by a security service, the company will notify the authorities.

A motion detector alarm can provide your home or business the security it needs. However, this will only take place if the unit has the right specs. A proper installation of the unit is also essential for it to work.

Tags: Crime Prevention, Burglar Alarms, Home Protection, Home Security, Alarm Systems, Alarms